A dog fence panels can give your garden a measure of integrity and increase the value and appearance of your home. It can also keep children and pets where they belong. A sturdy and attractive dog ear fence is well worth the money and effort put on it.
Instructions
24 Photos Gallery of: How To Construct A Solid Dog Fence Panels
Place the actions to mark the fence panel and tie a string between them. Determine where the port will be. If your garden backs, determine if the top of your fence will follow the slope of the yard or have a constant height. Locate the position of the corner posts, then measure and mark the position for line posts 8 feet in the middle. Mark the gate posts between the 3 and 4 feet in the middle. Add 2 inches of gravel to the bottom of each hole. If your fence will follow the slope of the yard, use services of the same length and set them all to the same depth. If you have chosen to make up your fence a constant height, you need longer fence posts for the deepest part of the farm.
Adjust the corners and gripper posts first. Place the post in the hole. Mix your concrete and pour it around until it is about 8 to 12 inches deep. Use a level to adjust the post so that it is straight. Use the corner posts as a guide to set line posts. Allow the concrete to cure for at least 24 hours. Refill with dirt. Install fence rails about 12 inches from the top and bottom of the posts using galvanized nails or outer wood screws. Place the middle rail halfway between the upper and lower rails. Attach strike guards.