Twin platform bed with drawers – A set of drawers for a full-size bed, you can take advantage of and organize more than 25 square feet of storage. These plans are for a twin platform bed with drawers underneath, but you can build any size mattress by adjusting the lumber sizes.
How to build a twin platform bed with drawers, use your power saw to cut the deal plywood sheets to the required dimensions. Sand all faces of all the lumber twice, once with coarse sandpaper and again with fine sandpaper. Apply a coat of paint on all surfaces of your timber. Let it dry. Set all four 2 of 8 beams on the ground, parallel to each other and to the ends lined up. Set two of your 54-inch by 37 1/2-inch plywood covers side by side on the frame formed by the beams. Facing the frame so it rests on the plywood. Enter the remaining two 54 inches by 37 1/2-inch plywood sheets on the beams and secured, just as you did the first two.
13 Photos Gallery of: Popular Twin Platform Bed With Drawers
after that to build a twin platform bed with drawers, one get two 7 1/2 inch wide sheets of plywood, 24 inches long and 33 inches long. Setting them in an L shape with the shorter blade at the end against the longer. Nail them in place with three finishing nails. Connect the L-shapes to form a rectangular frame: the walls of the box. Using three finishing nails per corner to secure them. Set the 25-inch by 33-inch sheet of plywood on top of the frame. Facing box above. Attach a drawer or cabinet pull to the center of a 33-inch of 7 1/2-inch plywood sheets. Push the boxes into the gaps between the beams of the bed frame to draw directed.